Over reasonably short distances high quality, 75Ω analog component video (Y'PbPr, YUV, etc.,) and RGB interconnect cables (including computer RGB video cables terminated with HD15 D-sub connectors,) WILL easily carry high resolution, high-definition video signals, including 1080p60 as well as progressive scan 1920×1200 WUXGA signals (used in high resolution computer displays.)
Excluding source material the only reason a 1080i limitation would exist when using analog video signals would be the result of the video equipment and its internal components rather than the cabling or interconnect method.
Neglecting the potential issues surrounding the use of analog interconnects that are sure to arise once content owners begin widely implementing the Image Constraint Token (ICT) on their high definition video content, the continued use of analog component video connections does have inherent drawbacks when connecting video components that process, store, transmit and display video entirely in the digital domain. These and other related disadvantages will only grow as new high performance video enhancements continue to emerge from the ongoing advances in digital technology.
________________________
The following will provide some insight into one manufacturer's interconnect preference for transferring high performance video signals.
For 1080p, HDMI is the best recommended cable to connect a Blu-Ray DVD (or Sony Playstation 3) to a 1080p DLP/LCD/Gas Plasma television screen.
Component video cables will provide pretty good quality, but if you're going to spend alot of money on a 1080p DLP/LCD/Gas Plasma screen & 1080p DVD player, you might as well spend a few extra bucks on HDMI connectors.
No, the S-Video would not carry audio. that's such as the Y-Pb-Pr connections yet multi functional cable. that's a larger technique of video sign dealing with than an RCA cable (not enormously much as good as Y-Pb-Pr) yet certainly seeing a distinction might rely on the time-honored of the climate used. except you're working extremely extreme end components with extremely crappy cables, I doubt you will see the diff. the actual income is outdoors interference rejection. The S-video will reject extra interference in maximum situations. If ya wanna try, plug up the yellow and unplug the S and notice what you think of.
Component carries 1080i or 720p signal in ANALOG form (vs HDMI carrying the digital signal). It can not carry 1080p signal.
The main difference in quality s NOT due to not being able to carry 1080p signal - it is due to the signal being ANALOG.
When connected viacomponent, DIGITAL signal (from DVD, cable, HD/BLURAY DVD) is concerted into ANALOG, carried with higher loss to the DIGITAL display, which converts ANALOG signal to DIGITAL to be displayed.
When you use HDMI connection, DIGITAL signal (from DVD, cable, HD/BLURAY DVD) is carried to the DIGITAL display. There is not DtoA or AtoD conversion.
Answers & Comments
Verified answer
Over reasonably short distances high quality, 75Ω analog component video (Y'PbPr, YUV, etc.,) and RGB interconnect cables (including computer RGB video cables terminated with HD15 D-sub connectors,) WILL easily carry high resolution, high-definition video signals, including 1080p60 as well as progressive scan 1920×1200 WUXGA signals (used in high resolution computer displays.)
Excluding source material the only reason a 1080i limitation would exist when using analog video signals would be the result of the video equipment and its internal components rather than the cabling or interconnect method.
Neglecting the potential issues surrounding the use of analog interconnects that are sure to arise once content owners begin widely implementing the Image Constraint Token (ICT) on their high definition video content, the continued use of analog component video connections does have inherent drawbacks when connecting video components that process, store, transmit and display video entirely in the digital domain. These and other related disadvantages will only grow as new high performance video enhancements continue to emerge from the ongoing advances in digital technology.
________________________
The following will provide some insight into one manufacturer's interconnect preference for transferring high performance video signals.
http://www.calibreuk.com/downloads/vantage-faqs.pd...
For 1080p, HDMI is the best recommended cable to connect a Blu-Ray DVD (or Sony Playstation 3) to a 1080p DLP/LCD/Gas Plasma television screen.
Component video cables will provide pretty good quality, but if you're going to spend alot of money on a 1080p DLP/LCD/Gas Plasma screen & 1080p DVD player, you might as well spend a few extra bucks on HDMI connectors.
Duane
No, the S-Video would not carry audio. that's such as the Y-Pb-Pr connections yet multi functional cable. that's a larger technique of video sign dealing with than an RCA cable (not enormously much as good as Y-Pb-Pr) yet certainly seeing a distinction might rely on the time-honored of the climate used. except you're working extremely extreme end components with extremely crappy cables, I doubt you will see the diff. the actual income is outdoors interference rejection. The S-video will reject extra interference in maximum situations. If ya wanna try, plug up the yellow and unplug the S and notice what you think of.
Component carries 1080i or 720p signal in ANALOG form (vs HDMI carrying the digital signal). It can not carry 1080p signal.
The main difference in quality s NOT due to not being able to carry 1080p signal - it is due to the signal being ANALOG.
When connected viacomponent, DIGITAL signal (from DVD, cable, HD/BLURAY DVD) is concerted into ANALOG, carried with higher loss to the DIGITAL display, which converts ANALOG signal to DIGITAL to be displayed.
When you use HDMI connection, DIGITAL signal (from DVD, cable, HD/BLURAY DVD) is carried to the DIGITAL display. There is not DtoA or AtoD conversion.
yes only 1080i and 720p thou hdmi does up to 1080p but only blu ray supports 1080p